Drivers side rear floor welded in, fuel injector bench cleaning, forward and backwards flow
06/19/2018
Finished the drivers side floor pan. At least the part behind the drivers seat. Next up is to beat the floor and squeeze the rocker panel in front of the drivers seat. There's also a bunch of jack damage in the pinch weld i need to work on.
I set up a little fuel injector tester and flush system. Basically you just use a little piece of hose and a children's medicine dropper to force throttle intake cleaner fluid through the injector while tapping a 9v battery to fire the injector. I do it backwards and forwards to clean them and see if they are leaking. Also they should make a similar pattern on the rag. You can use the rag to clean the outside of the injector afterwards.
Finished the drivers side floor pan. At least the part behind the drivers seat. Next up is to beat the floor and squeeze the rocker panel in front of the drivers seat. There's also a bunch of jack damage in the pinch weld i need to work on.
I set up a little fuel injector tester and flush system. Basically you just use a little piece of hose and a children's medicine dropper to force throttle intake cleaner fluid through the injector while tapping a 9v battery to fire the injector. I do it backwards and forwards to clean them and see if they are leaking. Also they should make a similar pattern on the rag. You can use the rag to clean the outside of the injector afterwards.
